Apg MPX Slave Sensor user manual Bedienungsanleitung PDF herunterladen (Seite 18)

MPX Series Magnetostrictive Level Sensors Rev. B, 4/13

Automation Products Group, Inc.

APG...Providing tailored solutions for measurement applications

Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]

Applicaon Parameters

Device Address (1 to 255) (40400)

Each device within the Modbus network must be assigned a unique address.

Each MPX sensor should be connected to the network individually and assigned

an address. Each sensor is set to address 1 by default.

Units (1 = Feet, 2 = Inches, 3 = Meters) (40401)

Determines the units of measure for the calculated reading (Input registers

30303-30304 and 30305-30306) when in Applicaon Types 0, 1, 7, or 11 (Dis-

tance, Depth of level, Pounds, Curve Fit).

Applicaon Type (1 to 11) (40402)

Determines the type of calculated reading performed by the sensor (refer to

pages 10-18). The calculated readings can be queried from Input registers

30303-30304 (top oat) and 30305-30306 (boom oat).

Applicaon Type 0: Distance

Sets the zero reference at the top of the stem and measures downward to

the oat posion.

40401 Units 1 to 3

40402 Applicaon Type 0

40404 Decimal Place 0 to 3

Applicaon Type 1: Depth of level

Sets the zero reference to the boom of the stem and measures upward to

the oat posion.

40401 Units 1 to 3

40402 Applicaon Type 1

40404 Decimal Place 0 to 3

40406 Full Distance Typically = Blanking Distance

40407 Empty Distance 0 to 10364 mm

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Keine Kommentare

Apg MPX Slave Sensor user manual Bedienungsanleitung Seite 18